Basic Hardware Kit

Pursuit Chassis Upgrades - Hardware Kit

$ 0.00

Parts in the CHASSIS section can only be chosen when purchasing a new chassis online!

Upgrade your Pursuit chassis with a basic or deluxe hardware kit!

The Basic Kit includes:

  • 1- Seat mount kit
  • 4- 1/4-20 Nylock nuts
  • 4- 5/16-18 Nyloc nuts
  • 8- 5/16-18 Nut
  • 6- 1/4-28 Easy start wheel studs
  • 6- 1/4-28 Smooth wheel flange nuts
  • 4- 1/2-20 Thin slotted jam nuts
  • 2- 1/2-20 Right hand jam nuts
  • 10- 5/16 SAE flat washers
  • 10- #12 SAE flat washers
  • 6- 7/8 od x 1/2 id 1/16 thick  spindle washers
  • 1- 7/8 od x 1/2 id 1/4 thick spindle washers
  • 2- 7/8 od x 1/2 id x 1/32 thick spindle washers
  • 10- large safety clips
  • 2- small safety clips
  • 3- 5/16-18x3 Elevator weight mounting bolts
  • 1- Plastic case

The Deluxe Kit includes:

  • 1- Seat mount kit
  • 1- Motor mount bolt kit
  • 12- ¼-28 Easy start tapered wheel studs
  • 4- ¼-28 Hardened steel ½ hex wheel nuts
  • 6- ¼-28 Smooth wheel nuts
  • 2- of each wheel spacers 1/8” & ¼” (8 pcs. Total)
  • 1- Aluminum spindle nut set
  • 1- Aluminum throttle clevis
  • 3- Aluminum spacers for pitman arm bolt
  • 1- Throttle cable
  • 1- Compression fitting
  • 1- 3/8 Hex cable pull adapter
  • 1- Throttle spring
  • 1- ¼” dia. Throttle rod locking collar
  • 1- ¼-28 thin steel jam nut for throttle assembly
  • 1- Throttle linkage kit
  • 20- Small safety clips
  • 5- Large safety clips
  • 2- Aluminum body brackets with springs installed
  • 2- Axle snap rings
  • 2- King pin bolts (1/2 x 3.75 Long)
  • 2- Rear bumper bolts w/ nuts
  • 1- ¼-28 x ¾ BHCS for axle bearing
  • 1- 5/16-24 x ½ Set screw for PM-15ULS
  • 3- 10-32 x 5/8 BHCS
  • 3- 10-32 Nyloc nuts
  • 6- ¼-20 x 1 HHB
  • 6- ¼-20 Nyloc nuts
  • 6- 5/16-18 Nyloc nuts
  • 10- 5/6-18 Nuts
  • 4- 3/8-16 thin jam nuts
  • 4- ½-20 Right hand thin jam nuts
  • 6- ½-20 Thin slotted jam nuts
  • 12- 7/8” OD x ½” ID x 1/16” thick spindle washers
  • 2- 7/8” OD x ½” ID x 1/4” thick spindle washers
  • 6- 7/8” OD x ½” ID x 1/32” thick spindle washers
  • 3- #10 Flat washers
  • 3- #10 Fender washers
  • 10- #12 Flat washers
  • 15- 5/16 Flat washers
  • 4- 5/16 Fender washers
  • 6- 3/8 Flat washers
  • 4- Nerf bar pins 1/4” dia.
  • 3- Seat weight mounting elevator bolts
  • 6- 5/16 Dzus buttons
  • 4- 7/17 Dzus buttons (Large 1 inch head)
  • 2- 3/8-16 x 1 head drilled HHB
  • 2- 3/8-16 x 1 ¼ HHB
  • 2- 3/8-16 x 1 ¼ drilled HHB
  • 2- 3/8-16 x 4 ½ drilled HHB
  • 1- 3/8-16 x 2 ½ drilled HHB
  • 2- 5/16-18 x 2 drilled HHB
  • 1- ¼-20 x 1 ¾ drilled SCHS
  • 1- Plastic case
Chassis-Hardware Kit Upgrades :
Quantity :